Green SC APC Field Mount Connector Single Mode No Epoxy For FTTB FTTC
Field Installation SC Fiber Optic Fast Connector no epoxy Single Mode 2*3mm IL<0.3dB
Yingda fast SC/APC connector to be mounted on a single-mode fiber end, without time-consuming gluing and polishing. The procedure does no require "sterile" conditions, because the end face of the built-in fiber fragment has been glued and polished by the manufacturer. The low loss at the level of 0.5dB is obtained thanks to advanced positioning of the inserted fiber end by V-shaped grooves. The optical gel that is also used in the connector reduces the effects of an imprecise cut and a possible gap between the end faces of the fibers.
Due to stepped end style APC ferrule (8 degrees), SC/APC connectors ensure lower back reflection, it can connected with 2.0*3.0mm cable or 2.0*1.6mm flat cable, which providing a decent quality without using expensive tools and maintaining special conditions.
Technical parameter:
| Model | YDFIC-D-SA-L | YDFIC-D-SA-S |
| Dimension | 60mm*9mm | 55mm*9mm |
| Insertion loss | <0.5dB, average≤0.3dB |
| Return loss | ≥50dB |
| Fiber type | Single mode, multimode |
| Fiber diameter | 0.9mm, 2.0mm, 3.0mm, 2.0*3.0mm |
| Working temperature | -40 ~+750C |
| Application | Fiber to the home |
| Dimension | 60mm*9mm | 55mm*9mm |
| Standards | ISO9001 |
Connector Structure:
There are 2 length to choose, difference like below:
Product Features:
Telecom standard mechanical connectors adopt brand new high-performance PEI material, it has good high temperature stability, high toughness and strength, good flame retardant performance, mechanical performance and wear resistance, durable and stable performance.
Calss A type Tree Circle ceramic ferrule ensure product performance stability and durability, low insertion loss and small change after long time, long life span; There is axial clamping force at the optical fiber joint. When the optical fiber is butted, the gap between the two optical fiber sections is almost zero, so the connection loss is less than 0.3dB.
The optical fiber clamp devices are made of high-performance material PEI, which can effectively prevent the aging of the original parts, heat and low temperature resistance, and prevent loose structure inside the device. During the clamping process, the optical fiber will not move forward, and the anti vibration drop performance is excellent, which can effectively prevent the excessive loss of optical fiber connection.
Pack information:
- Inner pack: 10pcs/blister box;
- 100pcs/each inner box, 1000pcs / carton box;
- length fix tool was equipped with the blister box at right, easy for operation to avoid losing.
How to use the mechanical connector?
How to re-use the fast connector?
Press the green house down to take it off, then can use it again.
Quality assurance:
Four times of grinding and two times of quality inspection
Step 1: 30um grinding
Step 2: 9um grinding
Step 3: 1 um grinding
Step 4: transparent polishing
Step 5: Optical fiber endface detection
Step 6: Insertion loss, return loss detection
Application:
Broadband campus network, Fiber to the home, Broadband limited TV, Intelligent broadband, Fiber to the building
Standard accessory:
- Fiber length fix tool guide -- 1pc/100pcs/inner box
- user manual -- 1pc/100pcs/inner box
Product Tags:
|
|
Green SC APC Field Mount Connector Single Mode No Epoxy For FTTB FTTC Images
|
